Panasonic HX-A500H User Manual

Page 27

Advertising
background image

27

(ENG) SQT0251

Using remote operation with a direct connection
([Smartphone Direct Connect])

∫

Preparations before using remote operation

1

Install the smartphone application “Image App” on your smartphone. (

l

26)

2

Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-
compatible), or iOS device.

≥

If your smartphone is NFC-compatible, a message asking you to touch the NFC mark on the
device will be displayed when starting up the “Image App”.

∫

If the device is Android (NFC-compatible)

≥

Set the NFC function of the smartphone to on.

1

Start up the smartphone application “Image App”.

2

Touch the smartphone on

of this unit.

≥

Touch the NFC mark while a message asking you to touch the NFC
mark on the device is displayed on the smartphone screen.

≥

If this is the first time the smartphone is connecting to this unit, the

message is displayed on the screen of this unit. Select [YES], press

the joystick, and then touch the smartphone on

of this unit again.

≥

If the unit is not recognized even when touching the smartphone,
change positions and try again.

≥

You cannot set up a connection when recording an image with this unit or the menu screen is
displayed.

≥

When the connection is complete, images of this unit is displayed on the smartphone screen.

∫

If the device is Android (non-NFC-compatible) or iOS

≥

This operation is not possible while this unit is recording.

1

Press the joystick to select the menu.

2

Select the [Smartphone Direct Connect], press the joystick, then start up the
[Smartphone Direct Connect].

≥

A Wi-Fi mode icon (

) will be displayed on the screen.

3

On the smartphone, select the SSID displayed on this unit from the Wi-Fi
setup menu.

4

Enter the Password displayed on this unit’s screen on the smartphone.

5

Start up the smartphone application “Image App”.

≥

When the connection is complete, images of this unit is displayed on the smartphone screen.

[Wi-Fi SETUP]

#

[Wi-Fi MODE]

Confirming that the Wi-Fi connection is complete

j

is displayed on the screen

HX-A500-SQT0251_mst.book 27 ページ 2014年4月14日 月曜日 午後6時15分

Advertising