Panasonic HX-A500H - Manual (Page 28)

28
SQT0251 (ENG)
If the Wi-Fi connection cannot be established
≥ Please refer to the operating instruction of the device in use for details about the setting of the
wireless access point or smartphone.
Reset Wi-Fi settings
You can change the Wi-Fi setting back to the default condition. The “LUMIX CLUB” Login ID can
also be deleted.
1 Press the joystick to select the menu.
2 (To delete the Login ID of the “LUMIX CLUB”)
Select [YES], then press the joystick.
Problem Check points
The Wi-Fi connection is
not possible between this
unit and a smartphone. ≥ Make sure the smartphone is properly connected to this unit
by checking the Wi-Fi settings of the smartphone.
≥ Make sure the SSID and Password have been correctly input.
≥ Make sure the smartphone is not connected to the wireless
access point. If it is connected to the wireless access point,
change the Wi-Fi access point using the smartphone’s Wi-Fi
set up.
It takes long time every
time to connect to a
smartphone. ≥ It may take longer time to connect depending on the Wi-Fi
connection setting of the smartphone, but it is not a
malfunction.
This unit is not displayed
in the Wi-Fi setting screen
of the smartphone. ≥ Try switching the on/off of the Wi-Fi function in the Wi-Fi
settings of the smartphone.
The Wi-Fi connection is
disconnected immediately. ≥ If there is a setting for avoiding poor connections in the Wi-Fi
setting menu of the Android device 4.0 or later version, turn it
off.
Cannot be connected
using NFC. ≥ Make sure your smartphone is compatible with NFC. This unit
can be used with NFC-compatible terminals via Android (OS
version 2.3.3 or later).
≥ Make sure the NFC function of your smartphone is on.
≥ Make sure this unit is turned on.
≥ Some smartphones cannot be easily checked simply by
touching. If this unit is not recognized even after touching,
change positions and try again by touching slowly.
≥ Touch again if it does not connect after touch.
If a connection still cannot be established, shut down the
“Image App”, turn off this unit and try to establish a
connection again.
≥ If the amount of time this unit is in contact with the
smartphone is too short, this unit may not recognize the
smartphone. Touch and hold the smartphone.
[Wi-Fi SETUP] # [RESET Wi-Fi SETTINGS] # [YES]
HX-A500-SQT0251_mst.book 28 ページ ２０１４年４月１４日 月曜日 午後６時１５分