Panasonic DMC-GH3KBODY User Manual

Page 48

Advertising
background image

48

Recording

VQT4S33 (ENG)

Focus and exposure can be adjusted to a specified subject. Focus and exposure will keep
on following the subject even if it moves. (Dynamic tracking)

When operating buttons
Place the subject in the AF tracking frame, and press the shutter
button halfway to lock the subject.

A AF tracking frame

AF area will turn green when the camera detects the subject.

The AF area turns yellow when the shutter button is released.

Lock is canceled when [MENU/SET] is pressed.

Up to 23 points for each AF area can be focused. This is effective when the subject is not
in the center of the screen.
(AF area frame will be same as image aspect ratio setting)

The camera focuses on the subject in the AF area on the center of the screen.

You can achieve a more precise focus on a point that is smaller than [Ø].

Setting up position of the AF area

Perform the operation after canceling the touch shutter function.

1

Select [

] and press

4.

2

Press

3/4/2/1 to set the focus position and then press

[MENU/SET].

The assist screen is enlarged to approximately 5 times original
size.

The assist screen can also be displayed by touching the subject.

3

Press

3/4/2/1 to align the subject on the cross point of the crosshair in the

center of the screen.
• The focus position

can also be set by dragging the screen.

Press [DISP.] to return the focus position to the center of the screen.

On the assist screen, it is also possible to record a picture by touching [

].

Setting up [

] ([AF Tracking])

About [

] ([23-Area])

About [

] ([1-Area])

About [

] ([Pinpoint])

A

DMC-GH3PPC-VQT4S33_eng.book 48 ページ 2012年10月22日 月曜日 午後3時2分

Advertising