Panasonic DMC-GH3KBODY - Manual (Page 78)

78
Connecting to other equipment
VQT4S33 (ENG)
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started on the camera’s monitor.
•
Grouped pictures are displayed individually.
• Some printers can print directly from the card removed from the camera. For details, refer to
the operating instructions of your printer.
1
Connect the printer and camera with the USB connection cable
(supplied).
• Turn the monitor toward you.
• Check the directions of the connectors, and plug them straight in or unplug them
straight out. (Otherwise, the connectors may bend out of shape, which will cause a
malfunction.)
• Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (DMW-USBC1: optional).
A USB connection cable (supplied)
B Align the marks, and insert.
2
Press 3/4 to select [PictBridge(PTP)], and then press [MENU/SET].
1 Press 3.
2 Press 3/4 to select an item and then press [MENU/SET].
Preparations: Turn on the camera and the printer.
Perform the print quality and other settings at the printer before printing the
pictures.
Selecting a single picture and printing it
1 Press 2/1 to select the picture and then press [MENU/SET].
2 Press 3 to select [Print start] and then press [MENU/SET].
• Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
3 Press 3 to select [Print start] and then press [MENU/SET].
• If the print check screen has appeared, select [Yes], and print the pictures.
• Disconnect the USB connection cable after printing.
DMC-GH3PPC-VQT4S33_eng.book 78 ページ ２０１２年１０月２２日 月曜日 午後３時２分