Panasonic DMC-GH3KBODY - Manual (Page 56)

56
Recording
VQT4S33 (ENG)
Setting the recording method of time code
Applicable modes:
Time code represents the recording time by the units of hour,
minute, second and frame, and can be used as a time scale for
editing motion pictures. This unit automatically records time code
during motion picture recording.
•
Time codes are not recorded on motion pictures recorded when the
[Rec Mode] is set to [MP4].
1
Select [Time Code] in the [Motion Picture] menu. (P21)
2
Press 3/4 to select the item and then press [MENU/SET].
Settings Description of settings
[Time Code
Display] [ON]/[OFF]
[Count Up]
[REC RUN]:
Counts the time code only when recording motion pictures.
[FREE RUN]:
Counts the time code even when not recording (including
when this unit is turned off).
[Time Code Value]
[Reset]:
Sets to 00:00:00:00 (hour: minute: second: frame)
[Manual Input]:
Manually input hour, minute, second and frame.
[Current Time]:
Sets hour, minute and second to current time and sets frame
to 00.
[Time Code Mode]
[DF] (Drop frame):
The camera modifies the difference between recorded time
and time code. This method is used for producing TV
programs and other situations where an exact time period
needs to be recorded.
[NDF] (Non-drop frame):
Records the time code without drop frame. Used in image
production, etc.
•
When [FHD/24p] or [FHD/24p/ ] is set, [Time Code Mode] is
fixed to [NDF].
98 98 98
TC TC 00:01:30:00 TC 00:01:30:00
DMC-GH3PPC-VQT4S33_eng.book 56 ページ ２０１２年１０月２２日 月曜日 午後３時２分