Panasonic TH65PF12EK - Manual (Page 16)

16
Basic Controls
Remote Control Transmitter
Standby (ON / OFF) button
The Plasma Display must first be
plugged into the wall outlet and turned
on at the power switch (see page 12).
Press this button to turn the Plasma
Display On, from Standby mode. Press
it again to turn the Plasma Display Off
to Standby mode.
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 17)
POS. /SIZE button
(see page 23)
PICTURE button
(see page 26)
Sound mute On / Off
Press this button to mute the
sound.
Press again to reactivate sound.
Sound is also reactivated when
power is turned off or volume level
is changed.
N button
(see page 25, 26, 27, 31)
POSITION buttons
INPUT button
Press to select INPUT1, INPUT2,
INPUT3 and PC input SLOTS
sequentially. (see page 14)
When a dual input terminal board
is attached, A or B is displayed
depending on the selected input
signal. (Ex. INPUT1A, INPUT1B)
MULTI Window buttons
(see page 18)
Digital Zoom (see page 20)
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 23)
SET UP button (see page 21)
SOUND button (see page 31)
Volume Adjustment
Press the Volume Up “+” or Down “–”
button to increase or decrease the
sound volume level.
R button (see page 21)
Press the R button to return to
previous menu screen.
OFF TIMER button
The Plasma Display can be preset to switch to
stand-by after a fi xed period. The setting changes
to 30 minutes, 60 minutes, 90 minutes and 0
minutes (off timer cancelled) each time the button
is pressed.
30 60
0
90
When three minutes remain, “Off timer 3” will
fl ash.
The off timer is cancelled if a power interruption
occurs.
1
2
3
4 10:00
PC
NANODRIFT High mid
4:3
Off timer 90
RECALL button
Press the “RECALL” button to display
the current system status.
1 Input label
NANODRIFT setting value
(see page 36)
2 Aspect mode (see page 17)
3 Off timer
The off timer indicator is
displayed only when the off
timer has been set.
4 Clock display (see page 54)