Panasonic TH65PF12EK - Manual (Page 52)

Options
Weekly Command Timer
1/3
Initial INPUT
Onscreen display On
O f f
Off
Off
0
0
Maximum VOL level
Initial VOL level
Off INPUT lock
Off Button lock
Off Remocon User level
Options
Enable Off-timer function
Normal Initial Power Mode
0 ID select
Off Remote ID
Off Serial ID
Off Display size
Off Studio W/B
Off Studio Gain
2/3
3/3 Options
O f f
Off
Off
Clock Display
Rotate
Off All Aspect
Manual Auto Setup
Slot1 Serial Slot Select
Slot power
Off Power On Screen Delay
52
Options Adjustments
Item Adjustments
Weekly Command
Timer
Sets Weekly Command Timer. (see page 55)
Onscreen display
On: Displays all the following on screen.
• Power on display
• Input signal switch display
• No signal display
• Mute and the remaining time of off-timer after was pressed.
Off: Hides all the items above from view.
Initial INPUT
Off PC INPUT1 INPUT2 INPUT3
Adjusts the input signal when the unit is turned on.
Notes:
• Only the adjusted signal is displayed. (see page 14)
• Signal can be displayed when the Terminal board is installed.
• This menu is available only when “INPUT lock” is “Off”.
• When a dual input terminal board is attached, A or B is displayed depending on the selected input signal.
(Ex. INPUT1A, INPUT1B)
Initial VOL level
Press button to adjust the volume when the unit is turned on.
Off On
Off: Sets normal volume.
On: Sets your preferred volume.
Notes:
• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.
Maximum VOL level
Press button to adjust the maximum volume.
Off On
Off: Sets auto maximum volume.
On: Sets your preferred maximum volume.
Notes:
• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically
becomes the same as the “Maximum VOL level”.
• The volume display can go up to 63 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.
1
Press to display the Setup menu.
5
Press to exit from Options menu.
2
4
3
Press to select “OSD Language”.
Press for more than 3 seconds.
Press to select “Options”.
Press to display the Options menu.
Press to select your preferred menu.
Press to adjust the menu.
Options
Shipping