Panasonic WV-CP290 - User Manual
Page 14
14
4
The coaxial cable(procured locally) is connected to this video output connector.
Important:
• Be sure to turn off the power of each device before connection.
• Be sure to secure the coaxial cable connectors.
Connect a coaxial cable to the video output connector.
5
Use a cable tie (locally procured) to attach the coaxial cable to the camera mount
bracket.
Important:
• The cable tie shall be made of metallic or durable material to be strong enough because
the tie plays the role of camera drop prevention measures in case.
• When the camera mount bracket is mounted on a wall, be sure to observe the mounting
height described on the illustration below.
To video input
Coaxial cables
WV-CP290
220
AC IN
- 240V
INT
ATW
ON
ON
. .
ON
BLC
D/N
LL
AWC
OFF
OFF
OFF
50Hz
~
VIDEO
OUT
BS
Camera mount
bracket (option)
The cable shall be
tied to the camera
mount bracket to
avoid slack.
The cable shall be
tied to the camera
mount bracket to
avoid slack.
Camera mount
bracket (option)
More than
270 cm
<Installation sample on a ceiling>
<Installation sample on a wall>
Floor
_