Panasonic WV-CP290 - - Manual (Page 6)

6
Preface
The WV-CP290,WV-CP294 are surveillance color CCTV cameras equipped with a 1/3 inch CCD
solid-state image sensor with 752 of horizontal pixels.
Features
The WV-CP290,WV-CP294 are provided with the adaptive black stretch function, high resolution
of 540 TV lines (horizontal), and minimum luminance of 0.8 lx (C/L),0.05 lx (B/W), F1.4(WIDE)
thanks to the adoption of the newly developed digital signal processor.
Precautions
This product has no power switch.
Power is supplied from an external 12 V DC/
24 V AC (WV-CP294) or 220 to 240 V AC
(WV-CP290) power-supply device. Refer to
service personnel for how to turn on/off the
power.
Use this product for indoor use only.
Do not expose this product to direct sunlight
for hours and do not install the product near
a heater or an air conditioner, otherwise it
may cause deformation, discoloration and
malfunction. Keep this product away from
water.
To keep on using with stable performance
• Parts of this product may deteriorate and
it may shorten the lifetime of this product
when using in locations subject to high
temperatures and high humidity. Do not
expose the product to direct heat such
as from a heater.
• Use this product at temperature within
–10 °C - +50 °C {14 °F - 122 °F} and
humidity below 90 %. (When using this
product without turning the power off)
Do not attempt to disassemble this
product.
To prevent electric shock, do not remove
screws or covers.
There are no user-serviceable parts inside.
Ask qualified service personnel for servicing.
Handle the product with care.
Do not abuse the product. Avoid striking,
shaking, etc. The product could be damaged
by improper handling or storage.
Cleaning the product body
Turn the power off when cleaning the product.
Use a dry cloth to clean the product.
Do not use strong abrasive detergent when
cleaning the product. When the dirt is hard
to remove, use a mild detergent and wipe
gently. Then, wipe off the remaining detergent
with a dry cloth.
Otherwise it may cause discoloration. When
using a chemical cloth for cleaning, read
the caution provided with the chemical cloth
product.
Noise on monitor
This product is equipped with a super
sensitive CCD. Therefore, white dot noise
may appear on the monitor. This phenomenon
is not trouble.
Discoloration on the CCD color filter
When continuously shooting a bright light
source, such as a spotlight, the color filter of
the CCD may have deteriorated and it may
cause discoloration. Even when changing
the fixed shooting direction after continuously
shooting a spotlight for a certain period, the
discoloration may remain.