Panasonic WV-CP290 - - Manual (Page 17)

17
Troubleshooting
Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution
in the table or a problem is not described below.
Symptom Cause/solution
Reference
pages
No image displayed
• Are the power cord and coaxial cable
connected appropriately?
→ Check whether the connection is
appropriately established.
–
• Is the monitor brightness
appropriately adjusted, or is the
contrast appropriately adjusted?
→ Check whether the monitor
settings are appropriate.
–
• Is the lens cap detached?
→ Check whether the lens cap is
removed.
–
Blurred image
• Is the lens of the camera soiled with
dirt or dust?
→ Check whether the lens of the
camera is clean.
–
• Is the focus adjusted correctly?
→ Check if the focus is adjusted
correctly.
–
Image Distortion
• Check if the DIP switch is set to “LL”
when the DC 12 V is used.
→ Set the DIP switch to “INT”.
9-10