Panasonic WV-CP290 - - Manual (Page 19)

19
Specifications
Power source and
power consumption:
WV-CP290: 220 V-240 V AC 50 Hz, 3.2 W
WV-CP294: 24 V AC 50 Hz, 2.9 W, 12 V DC, 240 mA
Image sensor: 1/3 inch interline transfer CCD
Effective pixels: 752 (H) x 582 (V)
Scanning area: 4.9 mm (H) x 3.7 mm (V)
Scanning system: 2 : 1 interlace
Scanning frequency: Horizontal: 15.625 kHz
Vertical: 50 Hz
Scanning: 625 lines/50 fields/25 frames
Synchronization: Internal (INT), multiplexed vertical drive (VD2) or line-lock (LL)
Resolution: Horizontal: 540 TV lines (at centre)
Vertical: 400 TV lines (at centre)
Minimum illumination: 0.8 lx(C/L),0.05 lx(B/W),F1.4(wide)
Signal-to-noise ratio: 50 dB (equivalent to AGC Off, weight On)
Video output: 1.0 V[P-P] PAL composite 75 Ω(BNC)
Lens mount: CS-mount
White balance: ATW/AWC
Switch function: White balance mode selector (ATW/AWC), Backlight
compensation selector (ON/OFF), Adaptive Black Stretch
selector (ON/OFF), Day/night mode selector (ON/OFF),
Synchronization mode selector (INT/LL)
Ambient temperature: –10°C - +50°C {14°F - 122°F}
Ambient humidity: Less than 90 %
Dimensions: 75 (W) x 65 (H) x 137 (D) mm
(excluding the lens connector)
Weight: WV-CP290: 365 g
WV-CP294: 330 g
Weights and dimensions indicated are approximate.
Operating Instructions (this book) ..................1 pc.
CD-ROM* ........................................................1 pc.
*The CD-ROM contains the operating instructions (PDF).
The following parts are used during installation procedures.
Power cord (approx.1.8 m)
(only for WV-CP290) .......................................1 pc.
Power cord plug (only for WV-CP294) ............1 pc.
Standard Accessories