Lower burner, Tools instructions, Incendalyst – Nieco JF64 User Manual

Page 20

Advertising
background image

20

Nieco Corporation - Model JF64-3G

3-Compartment Sink

1. Lift the burner latch.
2. Slide burner out.
3. Take to the 3-compartment sink and scrub with

a scrub pad or nylon brush.
4. If necessary, use a stiff toothbrush to clean

any clogged burner holes.

REASSEMBLY: Be sure the holes on the burner

are facing up.

Burner must be completely dry before

reassembly. Dry with a paper towel.

Lower Burner

Side

Tools

Instructions

Clean: Daily

Scrub Pad

!

EXTREMELY HOT! Be careful not to burn

yourself.

1. Grasp handle and lift Incendalyst™ off to

remove from chimney.
2. SOAK IN WARM WATER FOR 1 HOUR.

RINSE WITH WATER ONLY. NEVER USE ANY

CHEMICALS ON THE CATALYST.
3. Lay flat to drain water and let air dry overnight.
4. Make sure Incendalyst™ is dry before putting

back on broiler.

Incendalyst™

Top

Tools

Instructions

Heat Resistant Gloves

Clean: Weekly

CAUTION: Extremely Hot

Advertising