Power Soak 37179 PS-275 Service Manual - Manual (Page 10)

4
Detergents and Sanitizer – Section 3
3.1 Detergents
Power Soak machines require a low-foaming and recommend a metal/aluminum-safe
detergent. The detergent should have good grease cutting abilities and pH level that is
safe for human contact. Improper detergents may damage the equipment. Use of the
correct detergent in the Power Soak PS-275 is critical to its washing performance. If
there are problems with cleaning results, please contact Power Soak Systems (1-800-
444-9624).
3.2 Sanitizers
A "chemical sanitizing" method is used in the Power Soak system. There are a number
of products on the market that work well in this application. A chemical sales
representative should assist in selecting the proper sanitizer for each application. Check
with a cleaning chemical provider to determine the detergent concentration, sanitizer
"parts per million" (ppm) and sanitizer submersion times that will meet local health
codes.
3.3 Factory Assistance
If a chemical sales representative is having difficulty selecting a detergent or sanitizer,
or if there are poor results with the chemicals that have been recommended, please
contact a Power Soak representative at:
1-800-444-9624.
Detergents with high or low pH level will damage the
equipment and be harmful to human contact. Consult
with a chemical manufacturer representative for
recommendations on the selection of detergents.