Power Soak 37179 PS-275 Service Manual - Manual (Page 14)

8
5.1 Control Panel Overlay
The Control Panel Overlay is bonded to the surface of the enclosure door and conceals
the membrane that contains the push buttons and lights. The panel lights are used to
indicate conditions that have been detected by the operating program. The lights on the
face of the control panel operate in conjunction with the Alert Light System located on
the bottom surface of the control box (lights that shine on the floor). There are some
conditions that are indicated by the control panel lights which are not part of the Alert
Light System. The operator should review the control panel lights when determining the
operating situation of the machine. See the chart in section 5.2 for interpreting the light
combinations.
GREEN
STATUS
LIGHT
SECTION 5.3
RED SANITIZE
TANK
SECTION 5.7
BLUE WASH
TANK
SECTION 5.6
GREEN
UNLOAD/LOAD
SECTION 5.8
WHITE
POWER
LIGHT
SECTION 5.4
PURPLE
ERROR LIGHT
SECTION 5.5
HOT WASH
FLUID
CAUTION
DEEP CLEAN
MODE