Power Soak 37179 PS-275 Service Manual - Manual (Page 8)

2
Introduction – Section 1
1.0 Product Introduction
The Power Soak pot, pan and utensil washing system will provide years of dependable,
efficient and trouble-free service. Every system is manufactured to last, with only high-
quality, heavy-duty, 14 gauge stainless steel used in its construction. All electrical
components used in a Power Soak system are of the highest quality. The faucets and
drains are designed for quick filling and emptying of the system's tanks.
Most Power Soak systems are provided with a limited 3 year parts and labor warranty.
To inquire about the warranty status of a PS-275 Power Soak, please call the following
number and have the serial number of the machine available at the time of the call:
Power Soak Systems
(800) 444-9624
The people at Power Soak Systems take pride in manufacturing the Power Soak
equipment and are committed to standing behind Power Soak customers and products
100%.
1.1 General Description
The Power Soak PS-275 can be built with many variations to meet the needs of Power
Soak customers. The illustrations shown in this document cannot match all the possible
machine configurations, however; the information will apply even if a machine does not
match the illustration. The general configuration of a machine will start the work flow in
the scraping area and/or wash tank and finish in a sanitize tank and/or on a drain board.
The units that start with the scraping area and/or wash tank on the left are referred to as
a “left to right” or “left hand” unit. A “right to left” or “right hand” unit will start with the
scrap area and/or wash tank on the right hand side.