Vaddio ControlVIEW XHD - Manual (Page 14)

ControlVIEW XHD
ControlVIEW XHD Manual 341-917 Rev. C Page 14 of 24
ControlVIEW XHD Menu Structure
The ControlVIEW XHD has an 8-line LCD that displays the system menus. The menus are navigated with
the up/down arrows, select and cancel buttons. The menu structure is as follows:
1 st Screen ControlVIEW XHD
V01.00.00 (software version)
Rescan Cameras
Rescan Video
Video Output
Video Input Menu
Rescan Cameras
>Select (Note: Rescans all RS-232 ports for camera inputs)
>Start
Rescan Video
>Select (Note: Resets all inputs, outputs and video processor)
>Start
Video Output Menu (Note: Both video outputs will deliver the same output resolution)
>Select
>Video Output
>Program Output
HD 1080p 59.94 Hz
HD 1080p 50 Hz
HD 1080i 59.94 Hz
HD 1080i 50 Hz
HD 720p 59.94 Hz
HD 720p 50 Hz
HV 640 x 480 - 60 Hz
HV 800 x 600 - 60 Hz
HV 1024 x 768 - 60 Hz
HV 1280 x 768 – 60 Hz
HV 1280 x 1024 - 60 Hz
HV 1366 x 768 – 60 Hz
HV 1400 x 1050 – 60 Hz
HV 1600 x 1200 – 60 Hz
HV 1920 x 1200 – 60 Hz *
SD NTSC Composite
SD PAL Composite
SD NTSC Y Pb Pr *
SD PAL Y Pb Pr *
Video Input Menu
>Select
>All Ports (NOTE: Selecting ALL PORTS will configure all inputs to the same resolution)
* Ports 1 - 6 (NOTE: Same resolution options as Program Output menu, with the exceptions of 1920 x 1200
output resolution is not available, and SD S-Video replaces Y Pb Pr)
SD Video Format
>Select
>Squeeze
>Letter Box
>Crop
Enables the use of some SD signals to be mixed with HD video signals while avoiding aspect ratio problems
Default Preset No Default Preset Number
>Select
> 01 – 72
Assigns camera preset 1 through 72 as Default Preset on the default camera (default is 01)
Default Timer
>Select
>00 – 60
Default Camera Idle Return Timer - with no other trigger input, the system returns to the Default Camera and
Default Preset after this time elapses (default is 10, 00 disables function)
Preset Pan Speed
>Select
>01 – 24 (default is 18)
Sets the Pan Speed on all cameras between camera presets (24 is fastest)
Menu Section