Vaddio EZIM CCU Slot Card - Manual (Page 10)

WallVIEW CCU HD-18
WallVIEW CCU HD-18 Manual 341-889 Rev. C Page 10 of 18
WallVIEW CCU HD-18
Part Numbers WallVIEW CCU HD-18 999-6907-000 (North America)
WallVIEW CCU HD-18 999-6907-000W (Arctic White - North America)
WallVIEW CCU HD-18 999-6907-001 (INT’L)
WallVIEW CCU HD-18 999-6907-001 (Arctic White - INT’L)
• Vaddio ClearVIEW HD-18
Image Device 1/3” CCD
Picture Elements 1.3 Megapixels
Signal System HD: 1080p, 1080i or 720p @ 59.94; 1080p @ 60; 1080p, 1080i or 720p @ 50
SD: Composite NTSC or PAL (simultaneous with HD) NOTE: SD output not on Quick-Connect SR
Lens 18x Optical Zoom
Focal Length f=4.7 to 84.6mm
Horizontal Viewing Angle 3.2 to 55.2 degrees (16:9)
Frame Delay 1 frame
Video S/N Ratio >50 dB
Invertible Yes
Minimum Illumination 1.8 lux
Control Protocol VISCA
Serial Communication RS-232 (9600 or 38,400)
Pan Range +170 degrees to -170 degrees
Tilt Range +90 degrees to -30 degrees
Pan/Tilt Speed 0.25° to 60° degrees/second
Preset Positions 16 (internal), 6 recalled via IR Remote
Weight 5.8 lbs. (2.63 kg.)
• Quick-Connect CCU Interface (QCCU)
Connectors Power Connector: 5.5mm OD x 2.5mm ID
Power RJ-45: Supplies 36V to EZIM CCU
Control In RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control systems
Control Out RJ-45: Unused
Tally: 2-Pin Phoenix type spring cage connector
Video Inputs: BNC Connector for Sync (not available on HD-18)
Video Outputs: BNC Connectors for HD Analog Component (Y,PB,PR) / SD (Composite)
Video RJ-45: Transports HD video from camera EZIM CCU
Camera Select Switch For Future Use – All switches should be in the down position
Video Adjustments Y-Gain (luminance gain) for fine tuning over longer cable distances
Distance Compensation: 100’, 200’, 300’, 400’+
CAT-5 Cable Distance Up to 500’ (152.4m)
Power Supply 36 VDC, 2.78 Amp
Dimensions 1-RU Rack Mount - 1.75” H x 19” W x 6” D (4.45 cm x 4.26 cm x 15.24 cm)
•
Thin Profile Wall Mount HD-18
Materials 12-Gauge CRS with Black Powder Coat Paint
Dimensions 5.125” H x 6.75” W x 10” D (13 cm x 17.15 cm x 25.4 cm)
Weight Approx. 2.4 lbs. (1.1kg)
The WallVIEW HD-18 PTZ offers the following accessories for a complete, professional installation.
Drop Down Ceiling Mount
535-2225-296
15-pin to Male BNC output cable
440-5600-001 (3 ft.)
440-5600-002 (6 ft.)
440-5600-003 (7 inch.)