Vaddio EZIM CCU Slot Card - Manual (Page 2)

WallVIEW CCU HD-18
WallVIEW CCU HD-18 Manual 341-889 Rev. C Page 2 of 18
WallVIEW CCU HD-18 Overview
With the WallVIEW CCU HD-18 PTZ camera and CAT-5 cabling system, Vaddio delivers a solution that
allows for easy installation and integration. The camera is built around a 1.3 megapixel, 1/3” CCD with
an 18x optical zoom lens, making it the ideal choice for a wide range of high definition video applications.
In addition to the component HD output (720p, 1080i or 1080p), the camera comes with a simultaneous
composite SD output (NTSC or PAL).
Because the camera module is built around a CCD image sensor, the HD-18 is excellent in low-light
situations, with a 1.8 lux rating. In addition, the video signal to noise ratio output of the camera is greater
than 50dB, delivering clean, clear video.
The multi-element Wide Dynamic Zoom lens allows WallVIEW CCU HD-18 to capture a wide angle of
view (55.2°) enough to view everyone at a conference room table, as well as capture an individual from a
long distance (3.2°). The zoom range provides greater flexibility for a wide variety of applications. Pan
range is +170 to -170 degrees, and Tilt range is -30 to +90 degrees.
Paired with the HD-18 camera is Vaddio’s Quick-Connect CCU breakout box. Installed at the equipment
headend, the Quick-Connect CCU provides power, video and control up to 500 feet over three (3) CAT-5
cables. The CCU allows users to control a variety of image controls built into the camera, including iris,
red and blue gain, pedestal, knee, gamma, chroma and gain.
The WallVIEW CCU HD-18 is an exceptional camera system for integration projects, since no power
supply is required at the camera location. Use the WallVIEW CCU HD-18 for high definition camera
applications, such as houses of worship, corporate boardrooms, live event production and distance-
learning.
Intended Use:
Before operating the Vaddio WallVIEW CCU HD-18, please read the entire manual thoroughly. The
system was designed, built and tested for use indoors, and with the provided power supply and cabling.
The use of a power supply other than the one provided or outdoor operation has not been tested and
could damage the camera and/or create a potentially unsafe operating condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or
damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the
risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
Save These Instructions:
The information contained in this manual will help you install and operate your Vaddio WallVIEW CCU
HD-18. If these instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User
Guides and most pertinent product drawings for the Vaddio product line on the Vaddio website. These
documents can be downloaded from
www.vaddio.com free of charge.
Use only the power supply provided with the WallVIEW CCU HD-18
system. Use of any unauthorized power supply will void any and all
Do not use “pass-thru” RJ-45 connectors. Use standard RJ-45
connectors for best results.