Vaddio Outdoor Pendant Mount Dome for Vaddio HD-20/HD-19/HD-18 - Manual (Page 3)

DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome Manual 342-0188 Rev. B Page 3 of 8
Anatomy of the Weather-Resistant 12” Pendant Mount Dome
The enclosure will come partially assembled.
 1.5” NPT Pipe Flange: Fits 1.5” NPT pipe or wall
mount kit with 1.5” NPT male threads *
 Rubber gasket to seal between pipe flange
and plastic shroud *
 UV protected plastic
shroud with drip edge *
 Three (3) 10-32 x .5” pan head screws attach
through back of metal back can to the 2.5”
stand-offs
*
 Four (4) ¼’-20 Keps Nuts secure the 1.5” NPT
pipe flange to the enclosure *
 Sealed metal back can with weather
sealing gasket applies around flange *
 Three (3) 2.5” long 10-32 threaded F to F .5” Hex
stand-offs support the camera platform *
 Two ¼”-20 x 5/8” screws attach HD-18 camera to platform
 Two ¼”-20 x 3/8” screws attach HD-20 camera to platform
 Three (3) .75” long 10-32 threaded
M to F .5” Hex stand-off extensions
Use with HD-20 Camera Only
 Universal Camera Platform with Heater/Blower System *
 Three (3) 10-32 x .5” Pan Head Screws
attach through the camera platform to the
2.5” stand-offs
*
 Vaddio HD-20 or HD-18 PTZ Camera
 12” Smoke tinted dome with three (3)
stainless steel screws and metal
retention ring attached
*
* These parts are pre-assembled.
Not Assembled
Not Assembled
Not Assembled