Vaddio Outdoor Pendant Mount Dome for Vaddio HD-20/HD-19/HD-18 - Manual (Page 4)

DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome Manual 342-0188 Rev. B Page 4 of 8
Unpacking:
Unpack and identify the following parts for 999-9200-200 or 998-9200-201:
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome Enclosure Package includes:
 One (1) Dome Enclosure Assembly with the following parts:
o
One (1) 1.5” NPT Pipe Flange
o
One (1) Rubber Gasket (to seal between pipe flange and plastic shroud)
o
One(1) UV Protected Plastic Enclosure Shroud
o
Three (3) 10-32 x .5” Pan Head Screws (attach through metal back can to the 2.5” stand-offs)
o
One(1) Sealed Metal Back Can (with weather gasket applied around flange)
o
Four (4) ¼’-20 Keps Nuts (secures the 1.5” NPT pipe flange to the enclosure)
o
Three (3) 2.5” Long 10-32 Threaded F to F .5” Hex Stand-offs (supports the camera platform)
o
One (1) Camera Platform with Heater/Blower System
o
Three (3) 10-32 x .5” Pan Head Screws (attach the camera platform to the 2.5” stand-offs)
 Three (3) .75” Long 10-32 Threaded M to F .5” Hex Stand-off Extensions - Use with HD-20 Camera Only
 Two ¼”-20 x 5/8” Screws (attach HD-18 camera to platform)
 Two ¼”-20 x .3/8” Screws (attach HD-20 camera to platform)
 12” Smoke Tinted Dome with Metal Retention Ring and Three (3) Stainless Steel Screws Attached
 24 VDC, 2.0A Power Supply with 2-Pin Screw Terminal Adapter Attached and Power Cord
Notes: The 998-9200-201 includes a Euro and UK Power Cord.
Camera is not included.
Other things that are needed for system completion:
 One (1) Vaddio HD-20, HD-19 or HD-18 PTZ Camera Package
 18AWG, 2-Conductor Cable (for power supply extension to Heater Blower - up to 100’ /30.48m)
 Waterproof Silicone Caulk Sealer (for outdoor use) to seal the 1.5” NPT pipe flange threads at the top of the
dome enclosure.
 1.5” NPT Wall Mount/Pipe Mount/Structure Mount or 1.5” NPT Threaded Pipe (see Accessories - sold
separately)
Conveniently Located Accessory Section:
998-9000-210:
12” (304.5mm) Clear Dome Accessory
 Includes Clear Dome with Stainless Steel Screws
998-9000-220:
12” (304.5mm) Smoke Tinted Dome Accessory
 Includes Smoke Tinted Dome with Stainless Steel Screws
998-9300-000:
Wall Mount Kit for Pendant Mount Domes
 Heavy duty aluminum cast construction
 1.5” NPT threads easily onto domes
998-9300-001:
Wall Mount with Pole Mount Kit for Pendant Domes
 Heavy duty aluminum cast construction
 1.5” NPT threads easily onto domes
 Accommodates 3” (7.62cm) to 10” (25.4cm) poles
998-9300-002:
Structure Mounting Box Kit for Pendant Domes
 Mounting box with heavy duty 1.5” NPT thread adapter
 Requires 1.5” NPT pipe (not supplied)