Vaddio ProductionVIEW HD MV - Manual (Page 15)

ProductionVIEW HD MV
ProductionVIEW HD MV Manual - Document Number 342-0241 Rev G Page 15 of 36
FTB Speed: The speed at which the signal fades in and out can be adjusted through the internal menu of
ProductionVIEW HD MV. Speed ranges from 0.1 to 4.0 seconds (01 to 40 in the menu). See the
ProductionVIEW HD MV Menu Structure section of this manual for the location of the internal menu that adjusts
FTB timing.
Dual Mode FTB: Pressing and holding MIX/FTB in Dual Mode allows both the Preview and Program outputs to
fade to black, just as it will in Single Mode operation.
Note: FTB transition time is adjusted via the internal menu of ProductionVIEW HD MV, not from the Transition
Speed knob
.
Lower Screen Graphics:
Preparing to display Lower Screen Graphics on
ProductionVIEW HD MV, first select your
“background” video input (typically a live camera)
on the Program bus, and then select the input
that has the computer graphics that are to be
displayed, on the Preview bus. In the example to
the right, the background is Input 1 on Program,
and the computer is on Input 6.
To initiate the Lower Screen Graphic, press one
of the LSG buttons on either bus, and the graphic
will appear.
Transparency Level: To increase or decrease the transparency of the graphic overlay, press and hold the
Transparency Level button down. The system will toggle through the levels to allow the user to select the level
that is appropriate for the graphics.
Lower Screen Size: To increase or decrease the size of the graphic overlay, press and hold the Lower Screen
Size button. The system will toggle through the sizes (bottom ¼,
⅓, ½ or full screen), to allow the user to select
the level that is appropriate for the graphics that have been created.
Increasing/Decreasing Transparency Level and Lower Screen Size: When LSG is activated; pressing the
PIP upper left button will allow both Transparency Level and Lower Screen Size to increase when either button is
pressed. Pressing the lower left PIP button will allow the LSG controls to decrease when either button is pressed.
Note: This feature does not work in Dual Bus mode.
LSG in Dual Bus Mode: In Dual Bus Mode, where seamless switched outputs with effects and transitions can
be delivered out of both the Preview and Program outputs, select the Input on each bus that will be the
“background” image. Next, select the input that has the computer graphics that will be displayed (the second
button that is pressed on each bus will flash). Press the LSG buttons on the Program and Preview buses. The
graphics will be placed on each output seamlessly.
LSG Presets: Preset configurations for LSG can be set up utilizing the Camera Preset buttons in the upper right
of the console. Up to 12 preset configurations of lower screen size and transparency level can be programmed.
To do this, with LSG mode turned on, simply set a Lower Screen Size and Transparency Level. Next, press and
hold one of the 12 Camera Preset buttons for approximately 4 seconds. The Lower Screen Size and
Transparency Level will be stored in that preset position, much like a camera preset can be stored in the system.
Change the Transparency Level and/or Size and store the new preset in one of the other 12 Camera Preset
selector buttons. A total of 12 LSG presets can be stored in the system. The last LSG preset position displayed
will be the one recalled when LSG is turned back on. Currently, the preset positions for the LSG can only be
changed when LSG is turned on.
Note: A DVD containing sample graphics in both Keynote and PowerPoint is supplied with ProductionVIEW HD
MV. The sample graphics provide users with an easy way of getting started creating graphics for their own live
productions.
1 2 3 4 5 6
PROGRAM
PREVIEW
1 2 3 4 5 6
ProductionVIEW HD MV
PAN
SPEED
CAMERA PRESETS
CAMERA SELECT
WIPE PATTERNS P. I. P.
POSITIONING LOWER SCREEN GRAPHIC
MIX / FTB
TAKE
TRANSITION
SPEED
CUT WIPE
.01 4 SEC
+ -
PIP
PIP LSG
LOWER SCREEN
SIZE
TRANSPARENCY
LEVEL
AUTO
FOCUS
IRIS BLC
AWB
FOCUS
AUTO
IRIS
CONTROL MODE
TILT
SPEED
+ -
ZOOM
SPEED
+ -
LSG
CONTROL MENUS
MENU
STATUS LINE