Vaddio ProductionVIEW HD MV - Manual (Page 9)

ProductionVIEW HD MV
ProductionVIEW HD MV Manual - Document Number 342-0241 Rev G Page 9 of 36
ProductionVIEW HD MV, Rear View with Feature Call-outs:
1. Power Input: Use only the 18 VDC, 2.75A power supply provided with the ProductionVIEW HD MV.
2. Camera Control Ports on RJ-45 connectors: One camera control port per camera (no daisy-chaining
required). Compatible with Sony, Canon, Panasonic and Vaddio PTZ cameras. See page 7 for details on
cameras and camera systems compatible with ProductionVIEW HD MV.
3. Video Inputs 1-5: Each input 1 through 5 will accept either an HD (YPbPr) or RGBHV or SD (CVBS or Y/C,
with adapter cable) video signals selectable via internal menu on the DE-15-F connector. See the Video
Resolutions table on page 26 for all signals and resolutions supported.
4. Video Input 6: Input 6 is a DVI-I Input (DVI-D and DVI-A). See page 26 for supported resolutions.
5. Program Outputs: The Program outputs are on DE-15-F (HD-15) and DVI-D Connectors. The DVI-D
connector uses a HDMI 1.3 compliant transmitter, so with an adapter cable (DVI-D-M to HDMI) HDMI is also
output. The DE-15-F outputs HD (YPbPr) or RGBHV or SD (CVBS or Y/C, with adapter cable). The DVI-D
outputs DVI-D with sRGB color space and HDMI in YCbCr color space depending on the resolution chosen in
the menu. See page 26 for supported resolutions.
6. Preview/Multiviewer Outputs: The Program outputs are on DE-15-F (HD-15) and DVI-D Connectors. The
DVI-D connector uses a HDMI 1.3 compliant transmitter, so with an adapter cable (DVI-D-M to HDMI) HDMI
is also output. The DE-15-F outputs HD (YPbPr) or RGBHV or SD (CVBS or Y/C, with adapter cable). The
DVI-D outputs DVI-D with sRGB color space and HDMI in YCbCr color space depending on the resolution
chosen in the menu. When using the optional TeleTouch Touch Screen Controller, use the DVI-D Connector
and set the output to 1080p/60 HZ or 1080p/50 for best results.
Both Preview/Multiviewer connectors will be
the same resolution. See page 26 for supported resolutions.
Note: Transitions and effects will only appear on the Program output.
7. Tally Outputs/External Triggers: Allows for connecting ProductionVIEW HD MV to up to six (6) Program
Tally outputs and up to six (6) Preview Tally outputs when in Manual Mode. These tally outs can be set to
Triggers and used in Automatic Control Mode, which accepts external input triggers such as Vaddio
AutoVIEW IR, StepVIEW, TouchVIEW or MicVIEW triggering devices. ProductionVIEW HD MV recalls the
Camera Switching and Camera Presets automatically as the triggers are received. In this mode, an operator
is not required. See the menu tree for exact deployment.
8. Control Port: DB-9 for RS-232 control of internal functions (Pin 2 = TX, Pin 3 = RX, Pin 5 = GND).
①
②
③ ④ ⑤
⑥
⑦
⑧