Vaddio ProductionVIEW HD MV - Manual (Page 17)

ProductionVIEW HD MV
ProductionVIEW HD MV Manual - Document Number 342-0241 Rev G Page 17 of 36
Using the Multiviewer and Control modes with the Optional TeleTouch™ HD Touch Screen LCD Monitors:
Vaddio has the optional TeleTouch 22” and 18.5” Resistive Touch Technology, Full HD LCD Monitors available
for use with the ProductionVIEW™ HD MV and ProductionVIEW HD-SDI MV Multiviewer Video Consoles.
The Vaddio TeleTouch LCD touch screen monitors for the ProductionVIEW MV series consoles use 5-wire
resistive touch technology, which allows the operator to control the consoles with the simple touch of a finger,
gloved hand or stylus. The TeleTouch monitors can be configured to display up to six (6) input windows and two
(2) larger Preview and Program windows with green and red tally borders. In addition, each PTZ camera input
can store up to 12 video thumbnail preset camera shots.
Unlike retail/consumer grade monitors, the TeleTouch LCD panels are high-end, industrial quality and are
designed for durability when used in demanding control environments.
Connecting the TeleTouch Touch Screen LCD Monitors to the ProductionVIEW HD MV:
Step 1: To use the Multiviewer and TeleTouch Touch Screen Controller, connect the main RS-232 port (DB-9-F)
of the ProductionVIEW HD MV to the RS-232 port of the TeleTouch monitor with the cable provided. Connect the
provided DVI-D cable from the multiviewer output (preview DVI-D Connector) to the DVI-D input of the TeleTouch
Monitor.
Step 2: In the Main Menu, go to the menu item “MULTIVIEWER” and select “ON”. Then go to the “System
Menu” and go to the menu item “TOUCH SCREEN” and select the TeleTouch Monitor size (22” or the 18.5”),
which sets up the touch screen coordinates. To set the correct resolution for the TeleTouch, go to “System Menu”
and then select “Preview Output” Select either 1080p/60Hz (North America) or 1080P/50 Hz (International) output
resolution for the multiviewer. (see TeleTouch Touch Screen Control Panel with Multi-View Panel Layout Options
on Page 4 for more information).
TeleTouch 22” HD Touch Screen LCD Monitor with Base
(Simulated ProductionVIEW Multiviewer Output)
TeleTouch 18.5” Rack Mount HD Touch Screen LCD Monitor
(Simulated ProductionVIEW Multiviewer Output)
RS-232 (Cable Supplied)
DVI-D OUT from Multiviewer
to Monitor IN
(Cable Supplied)
ProductionVIEW HD MV with Built-in Multiviewer
22” TeleTouch Touch Screen LCD Monitor
RS-232
Port on
DB-9-F
RS-232
Port on
DB-9-F