Vaddio Quick-Connect Universal CAT-5 User Manual
Page 13
WallVIEW Universal CCU Cat-5 Version
Vaddio WallVIEW Universal CCU Cat-5 Version. Document Number 342-0512 Rev C Page 13 of 20
Step 5: Install the CONCEAL Rear Camera Cover
After successful testing of the camera, install the CONCEAL rear camera cover on the mounting bracket with the
supplied screw (see Fig. 5 and 6).
NOTE (One more time!): Check all Cat-5 cables for continuity in advance of the final
connection. Label the Cat-5 cables. Plugging the POWER cable into the wrong RJ-45 may
cause damage to the camera system and void the warranty.
Step 6: Connect System Power
Connect the Vaddio 36 VDC power supply to the Quick-Connect Universal CCU Interface and an AC outlet. The
CCU will power the camera via the Cat-5 cable. The camera will “Home” to a centered position ready for control
information from the Universal CCU. To ensure proper continuity of control and operation of the cameras, the
RS-232 controller (control system or joystick) should be powered on after the camera.
CONCEAL Rear Camera Cover
Completed CONCEAL Wall Mount
Camera Bracket Installation