Vaddio REVEAL User Manual
Page 13
REVEAL IN-Wall Cameras
REVEAL IN-Wall Camera Manual Document Number 342-0059 Rev. A
Page 13 of 28
• Quick-Connect
DVI/HDMI - SR Interface (used with REVEAL SYSTEMS 999-6926-000, 999-6926-001, 999-6936-000
and 999-6936-001):
Connectors:
1) Vaddio Blue LED Power Indicator: Illuminates when the 24 VDC Power supply is plugged in.
2) Power Input: 24 VDC, 2.0 Amp Power Connection, 5.5mm OD x 2.5mm ID, Positive Center.
3) RS-232 INPUT: Connect to joystick controller, codec or control system to control the REVEAL Camera.
4) TO CAMERA: RS-232 Control to & from the Camera and IR signals returned from the camera.
5) DAISY CHAIN Control Port: Daisy Chain Control Emulation (DCCE) output to next Quick-Connect DVI/HDMI for use when daisy
chain control lines can’t be avoided.
6) IR OUTPUT Ports: With the IR pass-thru function (IR OUT) turned on at the camera (see Camera Switch Settings section), it is
possible to send IR from third-party IR remote controls to third-party equipment, such as videoconferencing codecs. IR can be
output as either modulated (for IR Probe) or non-modulated (direct connection) signals for added flexibility in codec connection.
7) DVI-D Output: High Definition Multimedia Interface (HDMI) Transmitter, HDMI (v 1.3 with deep color) and DVI v 1.0 Compliant,
Resolutions up to 1080p/60 are supported.
8) YPbPr Output: DE-15F (15-pinHD) connector outputs the YPbPr analog component video from the REVEAL camera. Note:
The REVEAL also puts out SD video (480i/30fps & 576i/25fps) in YPbPr analog format. Resolutions up to 1080p/60 with monitor
support are possible.
9) EZCamera POWER & HD VIDEO Port: Supplies power to camera and returns HD video from the camera via Cat-5e. Maximum
distance on the CAT-5e cable is 100’ (30.5 m).
System Connectivity Example 1: Featuring the REVEAL Camera, Quick-Connect DVI/HDMI SR Interface, Preview Monitors and
Precision Camera Controller.
Rear Panel of the Quick-Connect DVI/HDMI - SR Interface (1/2 Rack Width Enclosure)
① ②
③
④
⑤
⑥
⑦
⑨
⑧
REVEAL IN-Wall
Camera System
Quick-Connect
DVI/HDMI - SR
Interface
Two (2) - Cat. 5e Cables
Up to 100’ (30.48m)
RS-232 Control
Power to Camera
HD Video from Camera
Vaddio ProductionVIEW™
Precision Camera Controller
RS-232
*Simulated Video Feeds
DVI or HDMI - Large Format
Monitor or Projector*
Vaddio PreVIEW™ HD 7.0 Rack Monitors*
DVI-D
YPbPr