Vaddio REVEAL - Manual (Page 4)

REVEAL IN-Wall Cameras
REVEAL IN-Wall Camera Manual Document Number 342-0059 Rev. A Page 4 of 28
Unpacking:
Carefully remove the complete REVEAL camera assembly and all of the hardware from the packaging. The exploded
view drawing below details the parts included. Please verify that all the parts are included.
1) One(1) REVEAL Camera Module and Enclosure
2) Four (4) Spiral Wall Anchors
3) Four (4) #8-32 x 1.25” Sheet Metal Screws
4) Four (4) 0.5” OD x 0.25” ID x 1.25” White Nylon Spacers
5) One (1) Face Frame Cover for Enclosure
6) Four (4) ¾” OD x ¾” Tall Brushed Aluminum Stand-offs
7) Four (4) ¾” OD Thin (clear) Nylon Washers
8) Four (4) ¼” x 20 x 1.0” Threaded Posts
9) One (1) Glass Plate (either dual pane smart glass or clear glass - depending on the camera ordered
10) Four (4) ¾” OD Nylon Washers with Centering Ridge
11) Four (4) ¾” OD Brushed Aluminum Post Caps
Packages:
Depending on the package ordered, the contents of the system differ. There are two (2) glass types (Clear and Smart
Glass), (2) Quick-Connect options (HD-18 Quick-Connect SR Interface and Quick-Connect DVI/HDMI SR Interface), two
(2) geographic options (North America and International) and finally an option for the Quick-Connect CCU Controller that
works with any system aforementioned above. The REVEAL product line is flexible with many options. The following
information regarding the contents of each of the packages will cover all the combinations available.
①
②
③
⑤
⑥
④
⑧
⑦
⑨
⑪
⑩
Note: The Smart Glass system is shown.
The Clear Glass REVEAL has a single pane of glass