General specifications – Vaddio SDI Slot Card for Vaddio ClearVIEW HD-18/20 User Manual
Page 16
WallVIEW CCU HD-18 HD-SDI
WallVIEW CCU HD-18 HD-SDI Manual 341-988 Rev. A
Page 16 of 26
General Specifications:
WallVIEW CCU HD-18 HD-SDI
Part Numbers
WallVIEW CCU HD-18 HD-SDI 999-6908-000 - North America
WallVIEW CCU HD-18 HD-SDI 999-6908-000W - North America (Arctic White Version)
WallVIEW CCU HD-18 HD-SDI 999-6908-001 - International
WallVIEW CCU HD-18 HD-SDI 999-6908-001W - International (Arctic White Version)
•
Vaddio ClearVIEW HD-18 *
Image Device
1/3” CCD
Picture Elements
1.3 Megapixels
HD-SDI Signals
SDI Signals
HD: 1080p @ 60/50/30/25 Hz, 1080i @ 59.94/50 Hz, 720p @ 59.94/50Hz
SD: 480i/29.97 or 576i/25 SD-SDI
Lens
18x Optical Zoom
Focal Length
f=4.7 to 84.6mm
Horizontal Viewing Angle
3.2 to 55.2 degrees (16:9)
Video S/N Ratio
>50 dB
Invertible
Yes, with image flip control
Minimum Illumination
1.8 Lux
Control Protocol
VISCA
Serial Communication
RS-232 (9600 or 38,400)
Pan Range
+170 degrees to -170 degrees
Tilt Range
+90 degrees to -30 degrees
Pan/Tilt Speed
0.25° to 60° degrees/second
Preset Positions
16 (internal), 6 recalled via IR Remote
Weight
5.8 lbs. (2.63 kg.)
•
Quick-Connect CCU Interface *
Connectors
Power Connector: 5.5mm OD x 2.5mm ID
Power RJ-45: Supplies 36V to EZIM HD-SDI
Control In RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control systems
Control Out RJ-45: RS-232 output to camera
Tally: 2-Pin Phoenix type spring cage connector
G/L Input: BNC Connector for Sync (not available on HD-18)
Video Outputs: Unused
Video RJ-45: Unused
Camera Select Switch
For Future Use – All switches should be in the down position
Video Adjustments
Detail, Red and Blue Gain, White Balance (Auto/Manual), Iris (Auto/Manual) Pedestal, Knee,
Chroma and Gamma, with 3 scenes of storage
CAT 5e Cable Distance
Up to 500’ (152.4m) – Control and Power Only
SDI Distance
See page 4 of manual for distances
Power Supply
36 VDC, 2.78 Amp
Dimensions
1-RU Rack Mount - 1.75” H x 19” W x 6” D (4.45 cm x 4.26 cm x 15.24 cm)
•
Thin Profile Wall Mount HD-18 *
Materials
12-Gauge CRS with Black Powder Coat Paint
Dimensions
5.125” H x 6.75” W x 10” D (13 cm x 17.15 cm x 25.4 cm)
Weight
Approx. 2.4 lbs. (1.1kg)
HD-SDI Slot Card for HD-18 Camera *
Part Number
998-6900-007 - For use with the Vaddio HD-18 PTZ Camera Only
Power Jack:
One (1) RJ-45, 36VDC used to Power HD-18 Camera and Slot Card with the Quick-Connect CCU
over Cat. 5
HD-SDI Output:
Two (2) Outputs on BNC Connectors (Carrier Class, Gold Finish Body and Contacts, Circuit Board
Edge Mount - 3Gb/s compliant)
Slot Card Connection to
Camera
One (1) 24-pin Self Guiding Blind Mating Interface Connector
Two (2) Captive, Spring Loaded, Retractable Thumb Screws
HD-SDI Transmitter
3Gb/s HD-
SDI/SDI transmitter, generating a SMPTE 424M, SMPTE 292M, SMPTE 259M-C
compliant serial digital output signal with integrated low noise VCO and integrated cable driver
(polarizing imaging array not included)
Dimensions:
PCB: 4.75” (120.65mm) W x 3.0” (76.2mm) D x .063” (1.6002mm )Thick
With Connectors and Mounting Plate: 5.875” (149.23mm) W x 4.25” (107.95) D
Weight:
0.3lbs (.13607772375643 kg - roughly)
* All Products Designed and Manufactured in the USA