Beijer Electronics SCOM Protocol EN - Manual (Page 36)

Command Reference
36 Beijer Electronics, MAEN975
6.10 MCC_COLOURTEMP (0xB3)
Color Temperature
Sets or queries the current color temperature.
Supported since Firmware Version
MT230 Nautic Monitor: 1.0
Command Stream
Response Message (Acknowledge)
0 1 2 3 4 5 6 7...7+[LEN]-1 7+[LEN]
0x07 ADR 0x4D 0x43 0x43 LEN ICHKH 0xB3 Param ICHKD
Param: ABSOLUTE
Value: “0”: 9300K
“1”: 7300K
“3”: 5000K
“4”: USER
Type: One-digit ASCII-encoded hexadecimal number
Length: 1
Description: New color temperature
Param: RESET
Value: “R” or “r” (0x52 or 0x72)
Type: ASCII character
Length: 1
Description: Reset the color temperature to an internally predefined value
Param: QUERY
Value: “?” (0x3F)
Type: ASCII character
Length: 1
Description: Query the current color temperature
0 1 2 3 4 5 6 7...7+[LEN]-1 7+[LEN]
0x06 ADR 0x4D 0x43 0x43 LEN ICHKH 0xB3 Param Ret ICHKD
Ret
Value: “0”: 9300K
“1”: 7300K
“3”: 5000K
“4”: USER
Type: One-digit ASCII-encoded hexadecimal number
Length: 1
Description: Current color temperature