NaceCare Solutions DP620 - Manual (Page 8)

8
Fig. 5
à
+
Fig. 4
Make sure that the same feelers remain flush with the side panel when the
lever is not pulled down. (fig. 4)
If the feelers protrude it may be impossible to insert or extract the tanks
containing the liquid from their housings.
LOADING THE WASHING LIQUID
Two tanks contain the solution for washing, both of these must always be at
the same level.
The tanks can be filled either by
pouring water in from a jug, (fig. 5)
or by placing the tanks themselves
under a tap as they are easy to
remove.
For ensuring the best use of your DUPLEX ask for the special detergents for
every type of floor from the manufacturer or authorised dealers (For the
doses please follow the instructions on the outside of the bottles).
The manufacturer declines all responsibility for damage
caused by incorrect use of the machine or detergents not
suitable for the type of floor.