NaceCare Solutions NR1520 - Manual (Page 10)

10
UPON COMPLETION OF WORK
DISASSEMBLY OF BRUSH/PAD DRIVER
To remove the abrasive pad, Lay the machine on the floor
so it is resting on the handle. With the appropriate handle
unscrew (counter clockwise rotation) the lock nut, Remove
the abrasive pad from the flange. Insert the lock nut after
the pad is removed. Return the machine back to it’s
upright position.
During storage, the machine must never rest on the
pad. The machine weight could permanently damage
it.
WARNING:
DISCONNECT POWER SOURCE BEFORE PERFORMING
MAINTENANCE ON THE MACHINE
DAILY MAINTENANCE
Before storing the machine:
• Examine the power cable for any damage.
• clean the machine with a damp cloth.
• Inspect the pad to determine if it needs to be
replaced.