NaceCare Solutions NR1520 - Manual (Page 9)

9
WORK
PREPARATION MANOEUVRE OF THE MACHINE
PREPARATION:MANOEUVERING THE MACHINE
By pulling the lever (A) lower the handle until the arms of
the user are lightly bent.
Using your thumb, push down on the safety lever (B) and
then engage the motor with the two levers (C).
The safety lever (A) must be pressed down every time
before starting.
For safety reasons, the motor cannot be operated when
the handle is in the upright position.
MANOEUVRING THE MACHINE
Every time the operator uses the machine he/she must be
confident with the movements of the machine. Do not go
near other people or obstacles. Always Keep the power
cable behind the operator. Be careful not to work with the
machine near the power cable.
Don not use the machine on the same area for prolonged
periods of time, doing this could damage the floor.
During use, use forward and backward movements.
Do not use the machine in the same area for
extended periods of time. Doing this could damage
the floor.