NaceCare Solutions NR1520 - Manual (Page 8)

8
GENERAL SAFETY RULES
Any use of the machine other than the specified uses different from the instructions written here or
recommended by NaceCare Solutions is prohibited and could cause bodily harm.
Do not remove or replace the specification plates on the machine for any reason.
Before operating the machine or performing maintenance, READ THESE INSTRUCTIONS CAREFULLY.
The use of the machine in closed surroundings is subordinated to rules effective in your country.
Do not use the machine for applications other than the specified ones.
Do not use the machine to collect acids or toxic materials.
Ensure that work surfaces, slabs, ramps can handle the weight of the machine.
While working, keep a suitable distance from people at work in the same area.
Do not put your hands in the machine while it is operating.
Do not operate the machine with loose clothing, which can get tangled in the disk.
While using the machine, ensure that there is no pieces of rope, cables or other loose debris which
could get tangled in the brush and harm the machine.
Use only the brushes delivered with the machine or those recommended by NaceCare Solutions.
The use of different brushes is unsafe and could cause bodily harm or serious injury.
The machine must be used by authorized personell trained on these safety rules.
The power socket must have a ground connection
Avoid the power cable while using the machine
If you notice that the power cable is damaged, stop using the machine immediately and have the
cable replaced by an authorized NaceCare Solutions service centre.
Do not mix chemicals of different brands.
The machine can be stored in temperatures between -25°C and +55°C.
The optimum working temperature of the machine are between 0°C and 40°C.
Humidity % must be within the values 30 to 95%.
Do not use the machine in explosive atmosphere or in presence of powders or flammable liquids.
Do not use acid solutions, which could damage the machine.
The chemical solution must not exceed the temperature of 50°C and each chemical must be used in
the concentration recommended by the manufacturer.
Avoid keeping the machine in one spot of the floor. This could damage the floor.
In case of fire, use powder extinguisher. Do not use water
Do not bump into shelving or scaffoldings with the machie.
When using this machine, the area of use should be blocked off and have signs indicating that the
floor is wet.
If you experience problems with this machine, bring it to the closest service centre. ONLY a NaceCare
Solutions service centre is authorized to perform repairs on this machine.
ONLY original spare parts may be used for the repair of this machine.
During regular maintenance of this machine, ensure the power source is disconnected and the proper
safety precautions are met.
Do not wash the machine with a power washer or hose. Use a damp rag to wipe down the machine.
Do not disconnect the power source while the machine is operating.