NaceCare Solutions ST50BT - Manual (Page 15)

15
TROUBLE SHOOTING GUIDE:
THE CENTRAL BRUSH DOES NOT CLEAN
• The brush is worn or improperly positioned: adjust its position or, if necessary, have
it replaced at your nearest service centre.
• The waste bin is full: empty it.
• The brush does not rotate because the belt is broken: have it replaced at your
nearest service centre.
THE MACHINE CREATES AIRBORNE DUST WHEN WORKING
• Flaps ensuring good suction are torn. Replace them.
• The filter is clogged: thoroughly clean the filter.
• The front flap is broken and the machine throws heavy dirt and waste forward:
replace the front flap.
EXCESSIVE OR ABNORMAL NOIS FROM THE CENTRAL BRUSH
• Material is wound around the brush: remove it.