Virtual loadmaster for kvm – KEMP KVM User Manual
Page 10
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 10 / 17
Virtual LoadMaster for KVM
Installation guide
13. Click the System Configuration menu option.
14. Click the eth0 menu option within the Interfaces section.
15. In the Network Interface 0 screen, enter the IP address of the eth0 interface, the
network facing interface of the LoadMaster, in the Interface Address input field.
16. Click on the Set Address button
17. Click on the eth1 menu option within the Interfaces section
18. In the Network Interface 1 screen, enter the IP address of the eth1 interface, the farm-
side interface of the LoadMaster, in the Interface Address input field.
19. Click on the Set Address button
20. This interface is optional, depending on the network configuration.
21. Click on the Local DNS Configuration > Hostname Configuration menu option.
22. In the Hostname configuration screen, enter the hostname into the Current Hostname
input field.
23. Click on the Set Hostname button.
24. Click on the Local DNS Configuration > DNS Configuration menu option.