Licensing and configuration, Virtual loadmaster for kvm, 4 licensing and configuration – KEMP KVM User Manual

Page 8

Advertising

Virtual LoadMaster for KVM

Installation guide

If the VLM does not obtain an IP address, or if the IP address needs to be changed, it can be
manually configured in the console by following the steps in Section 3.1.

2.4 Licensing and Configuration

The LoadMaster must be configured to operate within the network configuration.

1. In an internet browser, enter the IP address that was noted previously.

Ensure to enter https:// before the IP address.

2. A warning may appear regarding website security certificates. Please click the

continue/ignore option.

3. The LoadMaster End User License Agreement screen appears.

Please read the license agreement and, if willing to accept the conditions therein, click on

the Agree button to proceed.

4. A screen will then appear asking if you are OK with the LoadMaster regularly contacting

KEMP to check for updates and other information. Click the relevant button to proceed.

Figure 2-2: License Required

5. If using the Online licensing method, fill out the fields and click License Now.

If you are starting with a trial license, there is no need to enter an Order ID.

If you are starting with a permanent license, enter the KEMP Order ID# if

this was provided to you.

If using the Offline Licensing method, select Offline Licensing, obtain the

license text, paste it into the License field and click Apply License.For

detailed instructions on how to register for a KEMP ID and license the

LoadMaster, refer to the Licensing, Feature Description.

Advertising