KEMP KVM - Manual (Page 9)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 9 / 17
Virtual LoadMaster for KVM
Installation guide
Figure 2-3: Authentication Required
6. After the LoadMaster is licensed, a prompt will appear asking to log in. Enter the user
name and password and click OK.
Please use the following login credentials:
lb100 login: bal
Password: 1fourall
7. The Change Password screen appears
8. Enter a new password for the bal user in the Password input field and retype it in the
Retype Password input field.
9. The login screen appears again, enter the bal user name and the new password as
defined in the previous step.
10. In the screen informing you that the password has changed, press the Continue button
11. If your machine has shipped with a temporary license you should get a warning
informing you that a temporary license has been installed on your machine and for how
long the license is valid.
Click on the OK button
12. You should now connect to the Appliance Vitals screen of the LoadMaster.