AT&T CL82659 - Manual (Page 25)

Telephone operation
20
Making, answering, and ending calls
Making a call
To make a call:
• Press PHONE
/FLASH
or SPEAKER, then enter the
telephone number.
The screen displays the elapsed time as you talk (in hours,
minutes and seconds).
On-hook dialing (predialing)
1. Enter the telephone number. Press
MUTE
/DELETE or
OFF/
CLEAR to
make corrections when entering the phone number.
2. Press PHONE
/FLASH
or SPEAKER to dial.
Answering a call
To answer a call:
• Press PHONE
/FLASH
or SPEAKER.
-OR-
• Press any dial pad key (0-9, * or #).
Temporary ringer silencing
Press OFF/
CLEAR
or MUTE/
DELETE
while the telephone is ringing to
silence the ringer temporarily on that handset only. This turns off the ringer
without disconnecting the call. The next incoming call rings normally at the
preset volume.
Ending a call
Press OFF/
CLEAR
or return the handset to the telephone base or charger.
Auto off
A call ends automatically when you put the handset in the telephone base or
charger.
NOTE: Pressing
PHONE
/FLASH to access services from your local telephone service
provider does not affect the elapsed time.
NOTE: Each handset rings when there is an incoming call unless the ringer volume is
turned off on that handset.
QIPOF!!!1;11;41
Elapsed time