AT&T CL82659 - Manual (Page 29)

Multiple handset use
24
Multiple handset use
Handset locator
The handset locator feature is useful if you misplace any
handset.
To start the paging tone:
• Press HANDSET LOCATOR at the telephone base to
start the paging tone on all handsets for 60 seconds.
To stop the paging tone:
• Press PHONE
/FLASH
, SPEAKER, or any dial pad
key (0-9, *, or #) on the handset(s).
–OR–
• Press HANDSET LOCATOR on the telephone base.
Join a call in progress (not available on model CL82109)
You can conference with another system handset while on a call. If a handset
is already on a call and you would like to join the call, press
PHONE
/FLASH
or SPEAKER on another system handset.
Press OFF/
CLEAR
or place the handset in the telephone base or charger
to end the call. The call does not terminate until all handsets hang up.
NOTE: If you press OFF/
CLEAR
or MUTE/
DELETE
on a handset,
the ringer of the handset is off, but the page tone does not stop.
NOTE: The handset ringer volume also determines the volume of the paging tone. If the
handset ringer volume level is set to off, that handset is silent for all calls and paging
(page 10).
NOTE: You can only use two system handsets at the same time on an outside call.
++QBHJOH++