j5 create JUA370 - USB 3.0 Multi-Adapter VGA & Gigabit Ethernet - Manual (Page 11)

10
3. When the driver is completely
uninstalled, select “Yes, I want to restart
my computer now.” Click Finishto
restart.
INSTALLATION FOR MAC
Device Driver Installation
Installing the device driver enables your computer’s operating system to recognize the USB3.0
Multi-Adapter. Be sure that you are referring to the appropriate installation procedure before
you begin installing.
※
Make sure the USB cable is unplugged from your Mac Desktop or Mac Notebook before
executing the setup program.
This section illustrates the device driver installation procedure for a computer running Snow
Leopard.
1. Insert the Driver CD into the CD-ROM drive;
and run the .dmg file to load drivers in the
mac install folder
2. The installation page will be launched;
To begin installation click on start Get Last
Driver online, please make sure you are
connected to the internet or press Install Lan
to start the installation.