j5 create JUA370 - USB 3.0 Multi-Adapter VGA & Gigabit Ethernet - Manual (Page 4)

USB 3.0 MULTI-ADAPTER
USER MANUAL
3
INTRODUCTIONS
The j5create USB 3.0 Multi-Adapter series provides extra connectivity for your computer with 5
Gb/s faster transfer speed. These pocket-sized multi-adapters allow you to add an additional
USB computer peripheral, VGA monitor or gigabit LAN through USB port.
With j5create multi-adapters, there is no need to open up your computer to add an
expensive graphics card, you simply load the drivers, plug in the adapter to the USB port, then
plug in the VGA monitor cable into the adapter and you are ready. It supports three viewing
modes: primary, extended, mirror modes. With “plug & play” functionality between your
computer and 2nd monitor or projector, you will be able to create a new visual environment
in seconds.
The gigabit multi-adapter allows you to add networking capabilities to a computer without
them through a Wi-Fi connection. It has an RJ-45 connector that supports 10/100/1000 Mbps
Ethernet performance – perfect for your Ultrabook or MacBook.
j5create’s elegant multi-adapter series provides you with a fast and portable alternative
solution.
System Requirements
 Microsoft Windows 8, 7, XP (32-bit or 63-bit)
 Mac OS X 10.8 / 10.7 / 10.6
 CPU: Intel 2 core Quad 2.33 GHz
 RAM: 2 GB DDR2
 Available USB port (USB 3.0 is recommended)
Note for Video Player:
*Windows XP users: “Windows Media Player” is recommended for video playback
*Windows XP users & MAC users: Some Windows XP & MAC products are not supported
by USB 3.0 at this time, therefore we suggest USB 2.0 for ‘office applications’ only; Video
Playback is not recommend due to USB 2.0 bandwidth limitations causing limited video
performance.