Atex identification, Intended use, Condition monitoring – Goulds Pumps 3409 - IOM User Manual

Page 11

Advertising
background image

ATEX IDENTIFICATION

For a pumping unit (pump, seal, coupling, motor and pump
accessories) to be certified for use in an ATEX classified
environment, the proper ATEX identification must be
present.

The ATEX tag would be secured to the pump or the
baseplate on which it is mounted. A typical tag would look
like this:

The CE and the Ex designate the ATEX compliance. The
code directly below these symbols reads as follows:

II

=

Group 2

2

=

Category 2

G/D

=

Gas and Dust present

T4

=

Temperature class, can be T1 to T6

(see Table 1)

Table 1

Code

Max permissible

surface

temperature

o

F

(

o

C)

Max

permissible

liquid

temperature

o

F (

o

C)

T1

842 (450)

700 (372)

T2

572 (300)

530 (277)

T3

392 (200)

350 (177)

T4

275 (135)

235 (113)

T5

212 (100)

Option not
available

T6

185

(85)

Option not
available

The code classification marked on the equipment should be
in accordance with the specified area where the equipment
will be installed. If it is not, please contact your
ITT/Goulds representative before proceeding.

INTENDED USE

The ATEX conformance is only applicable when the pump
unit is operated within its intended use. All instructions
within this manual must be followed at all times.
Operating, installing or maintaining the pump unit in any
way that is not covered in this manual can cause serious
personal injury or damage to the

equipment. This includes any modification to the
equipment or use of parts not provided by ITT/Goulds. If
there is any question regarding the intended use of the
equipment, please contact an ITT/Goulds representative
before proceeding.

CONDITION MONITORING

!

For additional safety precautions, and where noted
in this manual, condition monitoring devices should
be used. This includes, but is not limited to:

u

Pressure gauges

u

Flow meters

u

Level indicators

u

Motor load readings

u

Temperature detectors

u

Bearing monitors

u

Leak detectors

u

PumpSmart control system

For assistance in selecting the proper instrumentation and
its use, please contact your ITT/Goulds representative.

3409 IOM 11/04

11

Advertising