Rugged Ridge XHD Low/High Mount Snorkel System, 07-11 Jeep Wrangler (JK) - Manual (Page 22)

Page 22 of 23 REV.1 06/25/2012
Snorkel Installation Instructions: 2007-2011 Wrangler 2DR & 4DR Unlimited
P/N: 17756.06 - Low Mount XHD Modular Snorkel System
1
- Snorkel kit includes a
cowl remount bracket.
The bracket will allow
snorkel to be removed
and factory upper fender
cowl bolted back into
stock location.
Cowl Remount Plate: Remounting bracket is designed to return vehicle to stock configuration
2
- Fender and snorkel will need
to be removed from vehicle.
Refer to steps (1) through
(21) of snorkel installation
instructions for fender
removal.
3
- Align bracket to the holes
of upper fender cowl plate
and fender. Plate will be
placed under fender as
shown.
5
- Tighten M6 hex head bolt
and nuts before reinstalling
fender on vehicle.
4
- Cowl should be aligned
with outer edge of fender.
6
- Installation of fender is the
reversal of steps (1) through
(21) of the snorkel installation
instructions. Reinstall
windshield bracket.