Rugged Ridge Standard Locking Console, Black Denim, 76-95 Jeep CJ & Wrangler - Manual (Page 3)

11. Secure Console and Mounting Bracket to the floor of the vehicle using
the (4) 8 X ¾” Sheet Metal Screws provided.
Figure 5 Figure 6
Section One – Installation Instructions continued
12. Remove the Consoles cup holder to expose the inner front section (Figure
7).
Figure 7
13. Drill one hole in the center and as far forward as possible through the
bottom of the Console and the floor of the vehicle using a 3/16” drill bit
(Figure 8).
Hole
Location
Mounting
Holes