Rugged Ridge Bowless XHD Soft Top, Spice, 97-06 Jeep Wrangler (TJ) - Manual (Page 2)

Jeep® TJ Wrangler XHD Bowless Top (With Factory Door Surrounds)
Page 2 of 6
(Step 5) - Pull and lock plastic side retainers into door surround. Front side rain flaps should be pulled
out over surrounds.
(Step 6) - Pull top forward and lock front plastic retainer into windshield header. Make sure retainer
is held in the full length of header.
(Step 4) (Step 5) (Step 6)
Part Number: 13750.35
13750.36
(Step 4) - Slide top forward and position foam supports on top of plastic door surround.
(Step 7) - Slide center strap between roll bar and sound bar. Pull through windshield footman loop.
(Step 8) - Slide strap through buckle and pull tight. Slide second plastic strap loop forward and
insert extra strap through loop.
(Step 9) - Pull rear of top into place over roll bar. Rear cross bar should rest at the start of the roll
bar turn down. Top should be centered to cross bar and the roll bar.
(Step 7)
(Step 8)
(Step 9)