Rugged Ridge Bowless XHD Soft Top, Spice, 97-06 Jeep Wrangler (TJ) User Manual
Page 3
Jeep® TJ Wrangler XHD Bowless Top (With Factory Door Surrounds)
Page 3 of 6
(Step 11) - Attach rear side window zipper to bowless top rear window. Pull zipper down about
3 inches. DO NOT pull all the way down at this time. Repeat for other side.
(Step 12) - Fish rear buckle strap behind side window and rear window zipper. Strap should run
parallel to roll bar. Repeat for other side.
(Step 10)
(Step 11)
(Step 12)
Part Number: 13750.35
13750.36
(Step 10) - Attach side window zipper to bowless top. Pull zipper 1/3 back. DO NOT pull all the
way back at this time. Repeat for other side. .
(Step 13) - Pull buckle strap down to body tub. Hook strap to the INSIDE of the tub and pull tight.
Secure Velcro straps and repeat on other side.
.
(Step 15) - Slide front side window plastic retainer into factory door surround. Repeat for other side.
(Step 14) - Secure inner Velcro straps to roll bar. Straps should be looped to front bar as shown.
Repeat for other side.
(Step 13)
(Step 14)
(Step 15)