Rugged Ridge Bowless XHD Soft Top, Spice, 97-06 Jeep Wrangler (TJ) - Manual (Page 5)

Jeep® TJ Wrangler XHD Bowless Summer Top Instructions
Page 5 of 6
(Step 2) - Loosen rear buckle strap and remove from vehicle. .
(Step 3) - Remove rear tailgate bar from top (bar to be secured back to body tub after removal). Fold
top over roll bar with rear window draped over front windshield.
(Step 1) (Step 2) (Step 3)
Part Number: 13750.35
13750.36
(Step 1) - Remove side windows from vehicle. Removal will be the reversal of steps (10 - 21) from
instruction sheets (3 - 4). Remove side Velcro straps from center roll bar.
(Step 5) - Place side windows onto front section of bowless top making sure windows are positioned
between Velcro strips.
.(Step 6) - Fold rear window back over top making sure side windows stay centered. Pull Velcro loose
from top of rear window and bowless top. Pull rear window tight and secure to Velcro on
either side of bowless top.
(Step 4) - Fold side windows as shown.
(Step 4) (Step 5) (Step 6)
The XHD Bowless Top can be converted to a full length summer island top with the removal of
side windows. Side windows are stored above roll bar for protection. No special storage flap
or extra buckles are required.