Moving parts entanglement hazard – Rugged Ridge 3,000 Pound Heavy Duty Winch, ATV/UTV User Manual

Page 5

Advertising
background image

5

Moving Parts Entanglement Hazard

Failure to observe these instructions could lead to minor or
moderate injury.
• Always keep wired remote control lead clear of the drum, rope

and rigging. Inspect for cracks, pinches, frayed wires or loose
connections. Replace remote control if damaged.

Never leave remote control where it can be activated during
freespooling, rigging, or when the winch is not being used

Always require operator and bystanders to be aware of ATV/
UTV and or load.

Moving Parts Entanglement Hazard

Failure to observe these instructions could lead to minor or
moderate injury.
General Safety:

Always know your winch. Take time to fully read the Installation
Guide and the Basic Guide to Winching Techniques in order to
understand your winch and its operation.

Never operate this winch if you are under 16 years of age.

Never operate this winch when under the influence of drugs,
alcohol or medication.

Never exceed winch or rope capacity listed on product data
sheet. Double line using a snatch block to reduce winch load

Installation Safety:

Always choose a mounting location that is sufficiently strong to
withstand the maximum pulling capacity of your winch.

Always use factory approved mounting hardware, components,
and accessories.

Always use grade 5 (grade 8.8 metric) or better mounting
hardware.

Never weld mounting bolts.

Always use care when using longer bolts than those supplied
from factory. Bolts that are too long can damage the base and/
or prevent the winch from being mounted securely.

Advertising