Moving parts entanglement hazard – Rugged Ridge 3,000 Pound Heavy Duty Winch, ATV/UTV User Manual

Page 6

Advertising
background image

6

Moving Parts Entanglement Hazard

Failure to observe these instructions could lead to minor or

moderate injury.

• Always inspect, rope, hook, and slings before operating winch.

Frayed, kinked or damaged rope must be replaced immediately.

Damaged components must be replaced before operation.

Protect parts from damage.

• Never leave remote control plugged into winch when free

spooling, rigging, or when the winch is not being used.

• Never hook rope back onto itself. This damages the rope.

Always use a choker chain, choker rope, or tree trunk protector

on the anchor.

• Always remove any element or obstacle that may interfere with

safe operation of the winch.

• Always take time to use appropriate rigging techniques for a

winch pull.

• Always be certain the anchor you select will withstand the load

and the strap or chain will not slip.

• Never engage or disengage clutch if winch is under load, rope

is in tension or drum is moving.

• Always select an anchor point as far away as possible. This will

provide the winch with its greatest pulling power.

• Never winch with less than 5 wraps of rope around the drum.

The rope could come loose from the drum.

• Never touch rope or hook while in tension or under load.

• Never touch rope or hook while someone else is at the control

switch or during winching operation.

• Always stand clear of rope and load and keep others away

while winching.

• Always be aware of stability of ATV/UTV and load during

winching, keep others away.

• Alert all bystanders of any unstable condition.

• Never use winch to secure a load.

• Always mount the winch and attach the hook to the rope`s end

loop before connecting the electrical wiring.

• Always spool the rope onto the drum in the direction specified

by the winch warning label on the winch and/or documentation.

This is required for the automatic brake (if so equipped) to

function properly.

• Always prestretch wire rope and respool under load before use.

Tightly wound wire rope reduces chances of binding , which can

damage the rope.

Advertising