In-Situ Tube 300R Telemetry System - Manual (Page 3)

800-446-7488 3 www.in-situ.com
Table of Contents
1 Introduction 5
Unpacking and Inspection 5
Model Number 5
Serial Number 6
Safety 6
General Specifications 7
2 Configuring Your Instruments 7
Overview 7
Connecting an In-Situ Instrument to the Computer 8
Instrument Communication Settings 8
Instrument Communication Settings - TROLL 9500 Only 9
Setting Up a Log 9
3 Configuring the Telemetry Device 9
Overview 9
Opening the Unit 9
Battery 10
Connecting the Tube to the Computer 10
Select Connected Probes 11
Select Probe Parameters for Alarming 11
Set the Site Name and Clock 12
Configure Options 12
Modem Parameters 12
Activate Alarms 13
Set Probe Reading Schedule 14
Set Wake Up Events 14
Activate the Modem 14
Test Remote Communications 15
4 Field Installation 15
Deploy the Tube 15
Improving Signal Quality 15
5 Troubleshooting 16
SIM Card 16
SD Card 17
Warranty 17
Troubleshooting Table 18
Obtaining Repair Service 19