In-Situ Tube 300R Telemetry System - Manual (Page 33)

800-446-7488 33 www.in-situ.com
Frequency of Wake-Up Events
Frequency of Wake Up Events - Frequency of Probe Readings
The Periodicity of Probe Readings and Options tab sets the frequency of
measurements and data collection.
1 Wake Up Events tab: sets up to eight events for the Tube to transmit data.
2
Sets the frequency of measurements in minutes taken from the connected probes.
A value of 1 equals a measurement every minute; a value of 1440 equals a
measurement every 24 hours.
3
Sets the frequency in which measurements are saved to the memory. A value of 1
means every measurement taken is saved; a value of 3 means every third
measurement taken is saved.
4 Enables/disables transmitting data after each log.
5 Enables/disables the wiper (only applicable to the TROLL 9500).
6 Sets the number of significant digits recorded for each measurement.
7 Writes settings to the Tube.